- +1 603 795 0617
- Sales@chinadrillingrigs.com
- 11807 Westheimer Rd, Houston, TX 77077, USA
Slant Well Drilling Rig
Slant well drilling rig
The mast is matched with hydraulic telescopic casing, and then the mast is conformed to API 4F, which is suitable for API Range 2 DP and API Range 3 casing pipe.
Product Introduction
- The upper support of the mast is installed when the inclined angle is more than 20°, which can make sure the stability of the mast. When it is in 90° condition, the mast is vertical. The maximum inclined angle of the mast is 45°. Minimum adjustment angle for every time is 5°. When it is in 45° condition, the maximum lifting force is 40metric ton.
- The mast is matched with hydraulic telescopic casing, and then the mast is conformed to API 4F, which is suitable for API Range 2 DP and API Range 3 casing pipe.
- Max. stroke of the top drive is 15,000 mm (49 ft). Crane is not used for the installation of the auxiliary support, only 5T forklift is adopted.
- The headroom of the substructure is 2500mm, meeting the needs of the installation of 28-21 BOP and four-way joint.
- The design and manufacture conforms to API SpecQ1, 4F, 7K, 8C, 16C and APIRP500, performing the standard of GB/T 30216-2013 and GB1589-2016. The design idea of people orientated is adopted, intensifying the methods of safety protection and inspection to meet the needs of HSE regulation.
Product Parameters
| Slant well drilling rig | CDR45-X | CDR75-X | ||
| Drilling capacity | Max drilling depth | m | 1000 | 1500 |
| Max drilling diameter | mm | φ650 | ||
| Diameter of drilling pipe | mm | 89 / 102 / 114 | ||
| Length of drilling pipe | mm | 6000 (Optional 9500) | ||
| Trailer-mounted chassis | Engine brand | / | Cummins | |
| engine power | kW | 264 | 317 | |
| rated load | kg | 13000*3 | ||
| Maximum speed | km/h | 70 | ||
| Tyre size | / | 12.00R20-20PR | ||
| Mast | angle adjustment | / | 45～90° (every 5° for adjustment) | |
| Stroke | mm | 9000 | 15000 | |
| Feeding system | Lifting force | kN | 490 | 750 |
| Speed of lifting | m/min | 0～17.2 | 0～36 | |
| Max. pressuring force | kN | 40 | 80 | |
| Power unit | Torque | N.m | 0～15000 | 0～20000 |
| Rotary speed | r/min | 0~170 | 0~160 | |
| Inner diameter | mm | 76 | ||
| Manifold pressure | Mpa | 21 (slurry+air) | ||
| Mud pump (Optional) | Max pressure | Mpa | 4.5 | / |
| Max displacement | L/min | 855 | / | |
| Tool winch | Lifting force | kN | 30 | |
| Transport dimension | Length ×Width × Height | mm | 13800×2550×4000 | |
| Overall weight | t | 32 | ||
Similar Product Recommended
